E1429B VXI 20 MSa/s 12 bit Digitizer with Local Bus

敘述
The Keysight E1429B digitizer is a C-size, 1-slot, message-based VXI module. It makes 12-bit, 20 MSa/s measurements, and contains two analog channels, memory, timebase, and data paths. The E1429B is functionally identical to the E1429A, except the E1429B supports local bus.

Ideally suited for transient signals, the E1429B arm/trigger circuits can be programmed to wait for the transient to occur. Up to 128 pre- and post-arm data sets can be stored in its segmentable memory. If power is lost, the E1429B keeps the data intact in its non-volatile memory. Both message- and some register-based programming is supported by the E1429B.

SCPI commands are used to program at a high level. Register-based reads and writes are supported for high-speed data-only access. An on-board voltage reference is used to verify that the E1429B is operational. Attenuators, amplifiers, A/Ds, memory, timebase, and digital circuits are tested upon power-up